5 Uses For Services

How to Refill Your Toner in Steps Printing has gone a step further with the advancement in technology. This has mainly been because of the introduction of laser printer toner. If your printing starts to fail, it means that your toner is out so you should refill it. Do not think that your cartridge is worn out because it is your toner that is out. The cartridge is always made in such a way that it will take some years before it wears out. The secret to make your cartridge last longer is when you are supposed to know that you are supposed to add your toner. This will help to extend its life. This is because each cartridge is made to work with a specific weight, gain size and chemical type toner. These are the specifics that will only work with that cartridge and not work with any other than the provided one. After knowing the right time when to add the toner, the other thing you have to know is how to do it. That is why you need a step guide on how to refill your ink toner. The are the following steps. The first thing that you have to do with your toner at hand is to locate the fill hole. Each and every cartridge has got a holding tank which holds the toner powder. Some of these cartridges have refill holes while other so not. There are also instruction guides on the refill kit on how you can do it. You will have to create a hole on your cartridge if it does not have a fill hole. You should not do this anywhere because you might end up destroying it. With the hole you are supposed to create it on either ends of the cartridge and not in the middle, mostly the side that faces up. Toner usually come with a specific cartridge that it can work with. This is where the second step come in. You will now have to pour the toner. Check if it is the right one and read the instructions on it. Counter check and see if the toner is still good or if it has expired. The toner kit also has got a funnel that you fit in the toner cup so that you do not spill the toner.
Looking On The Bright Side of Services
The last and third step is to release the fill hole. If your cartridge has a hole they you have to return the cup that cover the hole. Cartridge refill kits where you have burn a fill hole comes with a specific aluminum plate for that particular job. You will use the tape to cover the hole. You will now shake the cartridge gently so that it evenly distribute toner. You will now reinsert tit to the printer and start printing once gain.What Has Changed Recently With Services?